Context
You just rented a Linux VPS at Winheberg and want to secure it properly? Good news, a few simple steps are enough to block the vast majority of automated attacks targeting servers exposed on the Internet.
This step-by-step guide is designed for beginners. Every command is explained, and you'll understand why each step matters. It covers every distribution we offer, namely Debian 11/12/13, Ubuntu 23.10/24.04/25.04, AlmaLinux 9/10, Rocky Linux 9/10, Fedora 41/42, and Alpine Linux 3.22.
Why secure your Linux VPS?
As soon as a VPS goes online, it becomes a target. Thousands of bots constantly scan the Internet looking for misconfigured servers. Within just a few hours, your server can face several types of attacks.
- SSH brute-force attempts, where bots try thousands of passwords
- Port scans to detect vulnerable services
- Exploits of vulnerabilities in outdated software
A compromised VPS can be used to send spam, mine cryptocurrency, or take part in DDoS attacks, often without you even noticing.
Follow this guide as soon as you first connect to your VPS, before even installing your services on it.
Prerequisites
- An active Linux VPS at Winheberg
- Root SSH access to your server
- A local PC to generate an SSH key pair
1. Update the system
The very first step is to update all installed packages. This fixes known security vulnerabilities and gives you the latest stable versions of your software.
Connect to your VPS via SSH
ssh root@YOUR_VPS_IP
Your server's IP address was sent to you in the delivery email when you ordered, or is available in the IP Address section of your client area. Replace YOUR_VPS_IP with that address (for example ssh root@82.153.202.xx).
Run the update
apt update && apt dist-upgrade -y
Why dist-upgrade and not upgrade? The apt upgrade command can hold back certain critical updates (particularly Linux kernel updates or packages with new dependencies). apt dist-upgrade (or its equivalent apt full-upgrade) is more thorough and applies every security update without exception. It's the recommended command for a server.
dnf upgrade --refresh -y
The --refresh option forces a refresh of repository metadata before applying updates, to make sure nothing is missed.
apk update && apk upgrade
Get into the habit of running this command every week to keep your VPS up to date.
2. Secure SSH access
SSH is your VPS's main entry point. It's also the number one target for attacks. Here are the best practices to apply.
❌ Why changing the SSH port is pointless
Many tutorials recommend changing the default SSH port (22) to another port (for example 2222). That's a false good idea.
This is security through obscurity, you're hiding the service instead of actually protecting it. A modern scanner like nmap or masscan will find your new port within seconds. In the end, this change mostly complicates your administration (you need to specify the port on every connection), breaks certain tools that assume port 22 by default, and gives you a false sense of security.
Keep port 22 and apply the real protections below instead.
2.1 Set up SSH key authentication
Key-based authentication is much safer than a password. A private key is nearly impossible to guess through brute force, unlike a password, which can be attacked for days on end.
"Nearly impossible" with today's computers. With the rise of quantum computing, some classical cryptographic algorithms (like RSA) may become vulnerable in the future. That's why Ed25519 keys (used in this guide) are recommended today, more robust and already better prepared for the post-quantum era.
This step is identical regardless of your VPS's distribution, since it mostly happens on your local PC.
On your local PC (not on the VPS), generate a key pair.
ssh-keygen -t ed25519 -C "your_email@example.com"
Press Enter to accept the default location, then set a passphrase (a password protecting the key).
Then copy the public key to your VPS.
ssh-copy-id root@YOUR_VPS_IP
Test the connection.
ssh root@YOUR_VPS_IP
If you connect without being asked for a password (just the key's passphrase), everything works.
2.2 Disable password login
Now that key-based login works, disable password login to permanently block brute-force attacks.
Open the SSH configuration file, identical across every distribution.
nano /etc/ssh/sshd_config
Edit (or add) the following lines.
PermitRootLogin prohibit-password
PasswordAuthentication no
PubkeyAuthentication yes
The PermitRootLogin prohibit-password option allows root only via SSH key, never via password. PasswordAuthentication no completely disables password authentication, and PubkeyAuthentication yes allows key-based login.
Save (Ctrl+O, Enter, Ctrl+X), then restart the SSH service. The service name differs depending on the distribution.
systemctl restart ssh
systemctl restart sshd
rc-service sshd restart
Don't close your current session before testing the new configuration in another terminal. If something's wrong, you could end up locked out of the server.
3. Install a firewall
Which firewall to use depends on your distribution.
UFW (Uncomplicated Firewall) is an easy-to-use firewall that lets you only allow the necessary ports on your server.
Install UFW
apt install ufw -y
Allow SSH (critical step)
Before any other UFW command, allow SSH. If you skip this step and enable the firewall, you'll be immediately disconnected from your VPS with no way back in.
ufw allow OpenSSH
Set the base rules
Now that SSH is allowed, you can block all incoming traffic by default and allow outgoing traffic.
ufw default deny incoming
ufw default allow outgoing
The default deny incoming rule blocks everything coming in, except the exceptions you've defined (like SSH). The default allow outgoing rule lets your server keep communicating outward (updates, web requests, etc.).
Allow other services (if needed)
If you're hosting a website, open the HTTP and HTTPS ports.
ufw allow 80/tcp
ufw allow 443/tcp
Enable the firewall
ufw enable
Then check that everything is in order.
ufw status verbose
You should see your rules listed with active status.
firewalld is the default firewall in the Red Hat ecosystem. Unlike UFW, its default zone already blocks any incoming traffic not explicitly allowed, so there's no separate "deny incoming" rule to add.
Check that firewalld is active
systemctl status firewalld
On AlmaLinux, Rocky, and Fedora, firewalld is usually active by default. If it isn't, start it and enable it at boot.
systemctl enable --now firewalld
Allow SSH (critical step)
Before anything else, make sure SSH is allowed. It is by default on the public zone, but check anyway.
firewall-cmd --permanent --add-service=ssh
firewall-cmd --reload
Allow other services (if needed)
If you're hosting a website, open the HTTP and HTTPS ports.
firewall-cmd --permanent --add-service=http
firewall-cmd --permanent --add-service=https
firewall-cmd --reload
Check active rules
firewall-cmd --list-all
You should see the allowed services listed in the active zone.
Alpine doesn't include UFW or firewalld, so firewall protection goes through iptables.
Install iptables
apk add iptables
Allow loopback, established connections, and SSH (critical step)
Before applying a default block policy, explicitly allow SSH, or you'll end up locked out of the server.
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -p tcp --dport 22 -j ACCEPT
Allow other services (if needed)
If you're hosting a website, open the HTTP and HTTPS ports.
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -p tcp --dport 443 -j ACCEPT
Block the rest of the incoming traffic by default
iptables -P INPUT DROP
Make the rules persistent
By default, iptables rules are lost on reboot.
/etc/init.d/iptables save
rc-update add iptables
Check active rules
iptables -L INPUT -n -v --line-numbers
4. Install CrowdSec to block attacks
CrowdSec is a modern alternative to Fail2Ban. It analyzes logs in real time to detect malicious behavior (brute-force attempts, scans, etc.) and automatically blocks suspicious IPs.
Its distinctive feature is that CrowdSec shares malicious IPs with a worldwide community, which lets it block attackers before they even attack your server.
On Alpine, CrowdSec doesn't have the same level of support as on other distributions. The automatic install wizard doesn't work (it assumes systemd, which Alpine doesn't have with OpenRC), and the packages are only available in the edge/testing repository, not in the stable repos. A manual install is possible but is beyond the scope of this guide. On Alpine, the iptables firewall set up in the previous step remains your main protection.
Install CrowdSec
curl -s https://install.crowdsec.net | sh
apt install crowdsec -y
The installer automatically detects the services to monitor (including SSH) and configures the necessary collections.
Check the installation
systemctl status crowdsec
You should see active (running) in green.
To see the active detection scenarios, run the following command.
cscli collections list
Install the bouncer
CrowdSec detects threats, but it needs a bouncer to actively block them.
apt install crowdsec-firewall-bouncer-iptables -y
The bouncer registers itself automatically with CrowdSec. Then check that it's active.
systemctl status crowdsec-firewall-bouncer
Install CrowdSec
curl -s https://packagecloud.io/install/repositories/crowdsec/crowdsec/script.rpm.sh | bash
dnf install crowdsec -y
If the repository installation fails asking for pygpgme, this package is no longer packaged on recent versions of AlmaLinux and Rocky. Check the official CrowdSec documentation for the manual repository install method for your exact version.
Check the installation
systemctl status crowdsec
You should see active (running) in green.
To see the active detection scenarios, run the following command.
cscli collections list
Install the bouncer
dnf install crowdsec-firewall-bouncer-iptables -y
systemctl enable --now crowdsec-firewall-bouncer
Then check that it's active.
systemctl status crowdsec-firewall-bouncer
Test and monitor CrowdSec
To list current decisions (blocked IPs), use this command.
cscli decisions list
To check alerts (detected attempts), run this one.
cscli alerts list
Create a free account at app.crowdsec.net to view your alerts in a web dashboard and benefit from the community blocklist, which preemptively blocks IPs flagged as malicious by other users.
Summary of good habits
After following this guide, your VPS is protected against most common attacks. To maintain this level of security over time, keep these habits in mind.
- Update the system regularly
- Only use SSH key authentication
- Keep your firewall enabled and only open the ports you actually need
- Check the CrowdSec logs from time to time (
cscli alerts list), on distributions where it's installed
Need help?
If you run into an issue while securing your VPS, our team is here. Open a ticket in the Technical department from your client area and fill in the Related Product field with the VPS in question.
You now have a secure Linux VPS, ready to host your projects with peace of mind 🔒
